What factors are susceptible to the influence of vacuum pumps? Follow the editor of Wholesale Oil free vacuum pump manufacturers to have a simple understanding!
1. Environmental impact
The environmental impact is mainly due to the pollution of the pumped gas gas to the system. During the molten steel treatment process, the molten steel emits a lot of gas gas, and a part of small oxide dust and other small particles are sucked into the vacuum pump, causing these small particles to accumulate and adhere to the pump body. , Reduce the conductance of the pumping pipeline, extend the pumping time node, and reduce the pumping function of the pump.
2. The influence of the pump delay setting
Regarding the single-stage vacuum pump, the steam nozzle is the place that is simply worn. If the nozzle is worn, not only the function of the pump, but also the operating cost of the system, it is recommended to buy a two-stage vacuum pump and a two-stage vacuum pump.

3. The impact of drainage
Condensate has an unimportant position in the two-stage rotary vacuum pump. In order to protect the condensed water, steam can be condensed. The partial pressure of water vapor in the discharge pressure of the vacuum pump must be higher than its corresponding vapor pressure, and the temperature of the condensed water should also be lower than this. The full temperature under pressure, the normal operation of the pump body. In addition, because the condensing power of the condenser is also very important, the condenser has a poor condensing effect, and the steam is not rushed to condense, so it directly enters into the next stage of the pump. The load of the stage pump affects the pumping capacity of the pump. Therefore, the inlet temperature and flow rate of the condensate water and the operating conditions of the condenser have a great influence on the function of the pump.
The above is the introduction of Wholesale Oil free vacuum pump manufacturers: a brief introduction to the factors affecting vacuum pumps.