Hello, welcome to the official website of Zapa !

dianhuaHotline:+86 18930867676

language
中国
韩国
韩国
韩国
韩国
韩国
LOGO
Language
NEWS INFORMATION
NEWS INFORMATION

News

Check category
Location:
Homepage
/
/
/
Gas ballast principle of China rotary vane vacuum pump

Gas ballast principle of China rotary vane vacuum pump

(Summary description)There are small holes in the compression chamber of the oil seal machinery China rotary vane vacuum pump, and a regulating valve is installed. When the valve is opened and the intake air volume is adjusted, the rotor rotates to a certain position through which the air is mixed into the compression chamber to reduce the compression ratio so that most of the vapor will not condense and will be discharged together with the mixed gas outside the pump. The valve that plays this role is called a gas ballast valve.

Gas ballast principle of China rotary vane vacuum pump

(Summary description)There are small holes in the compression chamber of the oil seal machinery China rotary vane vacuum pump, and a regulating valve is installed. When the valve is opened and the intake air volume is adjusted, the rotor rotates to a certain position through which the air is mixed into the compression chamber to reduce the compression ratio so that most of the vapor will not condense and will be discharged together with the mixed gas outside the pump. The valve that plays this role is called a gas ballast valve.

Information

  There are small holes in the compression chamber of the oil seal machinery China rotary vane vacuum pump, and a regulating valve is installed. When the valve is opened and the intake air volume is adjusted, the rotor rotates to a certain position through which the air is mixed into the compression chamber to reduce the compression ratio so that most of the vapor will not condense and will be discharged together with the mixed gas outside the pump. The valve that plays this role is called a gas ballast valve.

Rotary vane vacuum pump

  Reason: Since the pumping process of the rotary vane vacuum pump is a compression process, when there are condensable gases such as water vapor, if the saturated vapor pressure is reached before being discharged from the pump chamber, they will be in the oil Condensation, resulting in emulsification and deterioration of the pump oil, deterioration of lubrication and sealing performance, and the condensate will become gaseous again in the suction chamber, thereby reducing the vacuum level.

  The principle of China rotary vane vacuum pump: the pressure of the exhaust chamber consists of two parts: air partial pressure and steam partial pressure. Bleeding occurs only when the sum of the two is sufficient to overcome atmospheric pressure and the elasticity of the exhaust valve.

  The advantages of China rotary vane vacuum pump gas ballast valve: meet the requirements of pumping out moist air without water vapor contaminating the oil; the ultimate pressure of the vacuum pump can be restored; purify the pump oil of the vacuum pump; restore the ultimate vacuum degree of the vacuum pump.

  The noise of the China rotary vane vacuum pump usually refers to the noise level measured under the ultimate vacuum when the pump temperature is stable. Including the noise of the pump itself and the noise of the motor.

Keyword:

Scan the QR code to read on your phone

zapa

Conatct

Tel:+86 18930867676

Add: Room 1820, Block B, Red Star World Trade Building, No.598, Nujiang North Road, Putuo District, Shanghai

zapa

Jobs

Zapa always believes that talents are the invincibility of the company in the market
Core resources

zapa

Talent Concept

Zapa always believes that talents are the invincibility of the company in the market
Core resources

Copyright:Shanghai ZaPa Vacuum Technology Co., Ltd.  - 2020 All Rights Reserved. 沪ICP备18006805号 Designed By:www.300.cn