Hello, welcome to the official website of Zapa !

dianhuaHotline:+86 18930867676

language
中国
韩国
韩国
韩国
韩国
韩国
LOGO
Language
NEWS INFORMATION
NEWS INFORMATION

News

Check category
Location:
Homepage
/
/
/
What should be paid attention to during the operation of china Two stage vacuum pump supplier?

What should be paid attention to during the operation of china Two stage vacuum pump supplier?

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2021-08-16
  • Views:0

(Summary description)china Two stage vacuum pump supplier is a series connection of two vacuum pumps including the pump body and the suction port and exhaust port set on the pump body, the vane groove and the vane rotor installed in the pump body, and the vane groove on the vacuum pump rotor In order to deviate from the oblique blade groove of the rotor axis line, the suction port of the subsequent vacuum pump is connected to the exhaust port of the previous pump.

What should be paid attention to during the operation of china Two stage vacuum pump supplier?

(Summary description)china Two stage vacuum pump supplier is a series connection of two vacuum pumps including the pump body and the suction port and exhaust port set on the pump body, the vane groove and the vane rotor installed in the pump body, and the vane groove on the vacuum pump rotor In order to deviate from the oblique blade groove of the rotor axis line, the suction port of the subsequent vacuum pump is connected to the exhaust port of the previous pump.

  • Categories:Industry News
  • Author:
  • Origin:
  • Time of issue:2021-08-16
  • Views:0
Information

china Two stage vacuum pump supplier is a series connection of two vacuum pumps including the pump body and the suction port and exhaust port set on the pump body, the vane groove and the vane rotor installed in the pump body, and the vane groove on the vacuum pump rotor In order to deviate from the oblique blade groove of the rotor axis line, the suction port of the subsequent vacuum pump is connected to the exhaust port of the previous pump. So what should be paid attention to during operation? Follow the editor to have a simple understanding!
1. Check the oil level. The oil level should be in the center of the oil standard. If the oil level is too low, it will not be able to seal the exhaust valve and affect the vacuum degree; if the oil level is too high, it will cause fuel injection when starting. Before running, take off the V-belt, correct the rotation of the motor, and then start it to avoid fuel injection. During operation, the oil level rises slightly, which is a normal phenomenon. When the amount of oil is insufficient, use | vacuum pump oil and add it from the oil filling hole. The oil needs to be filtered to prevent debris from entering and blocking the oil holes.
2. If the solenoid valve is connected to the china Two stage vacuum pump supplier port, it should act simultaneously with the pump.


3. When the china Two stage vacuum pump supplier starts to start, the start button should be clicked once or twice to make the oil pressure in the pump cavity into the oil tank, and then start the operation formally.
4. When the ambient temperature is high, the oil temperature increases, the viscosity decreases, and the saturated steam increases, which will cause the ultimate vacuum to decrease, so ventilation and heat dissipation should be strengthened.
5. To check the ultimate vacuum of the pump, a compression mercury vacuum gauge should be used. The vacuum gauge should be directly connected to the pump port, and the ultimate vacuum will be reached within 30 minutes of operation.
6. Before stopping the pump, the china Two stage vacuum pump supplier should close the valve at the suction port to isolate it from the vacuum system, and then stop the pump.

Keyword:

Scan the QR code to read on your phone

zapa

Conatct

Tel:+86 18930867676

Add: Room 1820, Block B, Red Star World Trade Building, No.598, Nujiang North Road, Putuo District, Shanghai

zapa

Jobs

Zapa always believes that talents are the invincibility of the company in the market
Core resources

zapa

Talent Concept

Zapa always believes that talents are the invincibility of the company in the market
Core resources

Copyright:Shanghai ZaPa Vacuum Technology Co., Ltd.  - 2020 All Rights Reserved. 沪ICP备18006805号 Designed By:www.300.cn