News
Do you know the structure of Wholesale Rotary vane vacuum pump?
- Categories:Rotary vane vacuum pump
- Author:
- Origin:
- Time of issue:2021-05-20
- Views:0
(Summary description)The eccentrically installed rotor in the pump of Wholesale Rotary vane vacuum pump is tangent to the fixed surface of the stator. Two (or more) rotary vanes slide in the rotor slot (usually radial) and contact the inner wall of the stator, dividing the pump cavity into several A variable-volume rotary variable-volume vacuum pump.
Do you know the structure of Wholesale Rotary vane vacuum pump?
(Summary description)The eccentrically installed rotor in the pump of Wholesale Rotary vane vacuum pump is tangent to the fixed surface of the stator. Two (or more) rotary vanes slide in the rotor slot (usually radial) and contact the inner wall of the stator, dividing the pump cavity into several A variable-volume rotary variable-volume vacuum pump.
- Categories:Rotary vane vacuum pump
- Author:
- Origin:
- Time of issue:2021-05-20
- Views:0
The eccentrically installed rotor in the pump of Wholesale Rotary vane vacuum pump is tangent to the fixed surface of the stator. Two (or more) rotary vanes slide in the rotor slot (usually radial) and contact the inner wall of the stator, dividing the pump cavity into several A variable-volume rotary variable-volume vacuum pump. So do you know what its structure is? Let’s take a look at it with the editor below!
The Wholesale Rotary vane vacuum pump can pump out the dry gas in the sealed container. If it is equipped with a gas ballast device, it can also pump out a certain amount of condensable gas. But it is not suitable for pumping gas with high oxygen content, corrosive to metal, chemical reaction to pump oil, and particulate dust.
Wholesale Rotary vane vacuum pump is one of the basic vacuum obtaining equipment in vacuum technology. Rotary vane pumps are mostly medium and small pumps. It has two kinds of single-stage and double-stage. The so-called two-stage is to connect two single-stage pumps in series in structure. Generally, it is made into two-stage to obtain a higher degree of vacuum.
The relationship between the pumping speed of the rotary vane pump and the inlet pressure is stipulated as follows: when the inlet pressure is 1333Pa, 1.33Pa and 1.33×10-1 (Pa), the pumping speed shall not be lower than 95% of the nominal pumping speed of the pump, respectively. 50% and 20%.
Rotary vane pump is mainly composed of pump body, rotor, rotary vane, end cover, spring and so on. A rotor is installed eccentrically in the cavity of the rotary vane pump. The outer circle of the rotor is tangent to the inner surface of the pump cavity (there is a small gap between the two). Two rotary vanes with springs are installed in the rotor slot. When rotating, the top of the rotary vane is kept in contact with the inner wall of the pump cavity by centrifugal force and the tension of the spring, and the rotor rotates to drive the rotary vane to slide along the inner wall of the pump cavity.
The above is the editor's introduction to the structural knowledge of Wholesale Rotary vane vacuum pump, you can learn more.
Scan the QR code to read on your phone
Conatct
Tel:+86 18930867676
Add: Room 1820, Block B, Red Star World Trade Building, No.598, Nujiang North Road, Putuo District, Shanghai
Jobs
Zapa always believes that talents are the invincibility of the company in the market
Core resources
Talent Concept
Zapa always believes that talents are the invincibility of the company in the market
Core resources
Copyright:Shanghai ZaPa Vacuum Technology Co., Ltd. - 2020 All Rights Reserved. 沪ICP备18006805号 Designed By:www.300.cn